Meet the Authors Event - How to Troubleshoot Network Problems with Vinit Jain
(Live event – Wednesday, February 12th, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event had place on Wednesday 12th, February 2020 at 10hrs PDT
In this session, Cisco Press author and Technical Leader Vinit Jain talks about the best practices and approaches to troubleshoot complex network problems. During the session, Vinit presents key content featured in the book Troubleshooting BGP: A Practical Guide to Understanding and Troubleshooting BGP and its relevance to identify and solve the BGP-related issues that network professionals are most likely to encounter in real-world deployments, including problems that have caused massive network outages. In addition, Vinit talks about his upcoming publications.
This event provides an opportunity to interact with the author in real-time and learn more about him, his story, the story behind the book, and how.
Vinit Jain is a Technical Leader with the Technical Assistance Center (TAC) in the Cisco Customer Experience (CX) Organization providing escalation support in areas of routing and data center technologies. Vinit is an author for Cisco Press titles Troubleshooting BGP, Troubleshooting Cisco Nexus Switches and NX-OS, LISP - Implementing and Troubleshooting LISP on Cisco IOS-XE, IOS-XR and NX-OS and for the BGP Troubleshooting LiveLessons video series.. Vinit is also a distinguished speaker at various networking forums, including Cisco Live events globally on various topics. Prior to joining Cisco, Vinit worked as a CCIE trainer and a network consultant. In addition to his CCIE (CCIE # 22854), he holds multiple certifications on programming and databases. Vinit holds a bachelor’s degree in mathematics and a master’s degree in information technology.
I have a new switch WS-C2960L-48TS-LL with IOS Version 15.2(6)E2b. I configured a port-channel (contain two port) and want to use load balance method src-dst-ip. But when I type the command port-channel and ?, it just show like this:&...
What exactly does the "Bytes dropped in asic" number displayed mean when you stop a capture? See below. I created a capture to source from a vlan, circular buffer, 50 meg size. I've tried various combos and it still happens on all - capturing from a physi...
Hey community! We have a Cisco 4331 or 10 in our environment. Below is our current QoS policy. When I do a "show access-lists" I don't get a count for matches for access list 101, which is used in our QoS policy. Does that mean the access list isn't catch...