Troubleshoot Network Address Translation (NAT) issues without including any IP routing protocol information. This is also true for Policy-Based Routing (PBR) and Hot Standby Router Protocol (HSRP) issues.
NAT allows a single device, such as a router, to act as an agent between the Internet (or public network) and a local (or private) network.
NAT issues are independent of IP routing protocol and do not need any information on routing protocol to troubleshoot them. To help this tool identify and troubleshoot NAT issues correctly, do not select any IP routing protocol (such as Open Shortest Path First Protocol (OSPF), Border Gateway Protocol (BGP), or Enhanced Interior Gateway Routing Protocol (EIGRP)).
ello, I have a 2960X-48FPS-L with 15.2-7.E5 (also tested on 15.0), and when I plug in the first port from a QNAP NAS it will not recognize it being plugged in, but it will recognize the second port. With Term Mon turned on, it shows no log of i...
HelloI just want to ask if there are any alternatives to 802.1x or web based authentication and authorization with TACACS+ only.I can not use RADIUS although i have to authenticate end users with TACACS+ to allow them to use the network services like inte...
I have configured Prime 3.3 to authenticate from ISE TACACS+ using ISE internal identities. But noticed that the external users cannot change their passwords. Please suggest how to manage external user passwords for Prime Infrastructure?
Hi, I'm trying to understand what could be the most useful Snmp traps to enable on a core switch in general. Any idea? Going more specifically Also for broadcast storm problems and other type of problems related to it. I already enable the "storm-control"...