This document describe my idea how to configure routing on one Cisco router with two WAN lines from different ISP.
The diagram below presents this situation. Let's say that WAN from ISP1 - 184.108.40.206/30 has bigger bandwidth and we want to use it as primary line. WAN from ISP2 - 192.168.2.0/30 is a backup line.
ip sla 1 // we are checking availability of DNS server from TPSA (220.127.116.11) with source of WAN ISP1
icmp-echo 18.104.22.168 source fa0/0/1
frequency 3 // we set frequence of probes for 3 seconds
ip sla schedule 1 start-time now life forever // lets start it
track 1 rtr 1 reachability // starting tracking
ip route 0.0.0.0 0.0.0.0 192.168.1.1 track 1 // if track 1 that checks availability of DNS server is true, the default route is set to use WAN ISP1. Whenever it fails, the static route will be disabled and backup default route with AD 200 will be used.
I have some 100b with older code 15/16.x and vMAnage will not recognize them. How do I manually update the code to 19.x or are there a series of commands to force it to recognize vMange? thanks in advance, Ben
Hi all, I have a Cisco C921-4PLTEGB currently connected to the EE network using its Cellular interface.I have one VLAN (VLAN10) setup to connect back to our corporate network via a tunnel. All traffic by default should go down this tunnel for DH...
I'm struggling with my homework as I still don't fully comprehend the concept. I don't necessarily need the full answer but I would appreciate if someone could guide me in the right direction. The scenario is:The host network is 138 . 191 . 248 . 0 /...
Hi All, I have been assigned a ticket where I am asked to perform a reboot of a device with the help of onsite support. The problem is:Everything related to the device's location is not up to date like rack location, rack name, rack unit, floor, etc....
Above is my network setup, I have a DMZ zone and then the rest of the LAN. The DMZ is directly connected to fortigate and the rest of the LAN is connected with VLAN 1 of the switch to fortigate, the situation is as below: None of the Client PCS...