When switch is reloaded, the crypto keys disappear even though the write memory command is issued before every reload.
After you configure the Sup720 for Secure Shell (SSH), SSH works. But after a reload, SSH no longer works. This occurs because the Rivest, Shamir, and Adelman (RSA) key is on longer in there. When the RSA key is regenerated, the SSH works again.
This problem is documented in Cisco bug ID CSCeb54694.
Complete these steps for a workaround:
Generate the RSA key everytime after reload. In order to generate RSA key pairs, use the crypto key generate rsacommandinglobal configuration mode.
This problem is resolved in Cisco IOS 12.2(17b)SXA and later, which can be downloaded from Cisco Downloads.
Hi all, hope someone can help me and explain to me the followingI have an edge of the network with the following equipment, 1 Switch from Comnet, 1 Cisco 2960 and a Cisco 3650 where basically, the Comnet on vlan 40 (cameras) connects to the cisco 296...
Is there ANY WAY to change the VTP mode and domain in a Catalyst 9500 from transparent to server without human intervention? That is without manually configure 'vtp mode server' and 'vtp domain MyVtpDomain'At one site they plugged in a Cisco switch with V...
Hello I have several FEX configured. Something like that. And I want to change one FEX from one stack to another stack Fabric Fabric Port FEXFEX Port State Uplink Mod------------------------------------110 Te1/1/6 bound Te1/0/1110 Te2/1/6 ...
Hello, I have a situation that I don't know how to solve in a best way, and I though that maybe someone here could help me.There are two networks:-Network A, let's call it Audio Network, with 192.168.0.x/24 that is using SG350 and is managed by me-Ne...
Hi,We are using cisco catalyst 3750x 24 port switch seriesHow to Change the Exact Date(Singapore) on a SwitchASW-G-L09-001#show running-configBuilding configuration...Current configuration : 11883 bytes!! Last configuration change at 15:46:32 PST Wed May ...