The error message is received when the archive copy-sw or archive download-swprivileged EXEC command is issued on the stack master to copy the running image from the Flash memory on one stack member to the Flash memory on other stack members.
To resolve the issue, perform these steps:
Make sure you are able to ping the TFTP server IP address from the switch.
Verify your TFTP server is working, and if possible, try a different TFTP server.
Remove any old information directory from the Flash.
If the error message still appears, format the Flash and reload the switch. After you format, the switch might boot into ROM Monitor (ROMmon) mode. If the switch boots into ROMmon mode, recover the switch using Xmodem.
%Error opening flash:update/image-name/info (No such file or directory)
Hi All, I am having a problem is routing traffic towards my ASA VPN tunnel below is the requirement Remote VPN Network: 192.168.66.0/24Local Network: 172.20.30.0/23Traffic from 172.20.30.17 host is set to go to default GW 172.20.30.1 which...
Hi I have read that if we have transparent switches in the domain we should disable vtp pruning for the entire domain.https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3560/software/release/12-2_55_se/configuration/guide/3560_scg/swvtp.html&...
when I do the l2tp protocol configuration it works perfectly when I connect but I have no internet connectionusername xxx privilege 0 password 0 xxxip local pool l2tp-pool 192.168.13.7 192.168.13.12vpdn enablevpdn-group g-l2tpaccept-dialinprotocol l2tpvir...
Hi,I may be in the wrong discussion group, apologies.The company I work for will release Training Budget end January 2020. I was planning to cover my ICND 1, so I was studying for the exam prior to the course. Cisco have now moved the goal post...
Hello All, i always find STP very confusing , however i am currently studying switching and i have the below questions:- 1-i believe that the root switch election will occur before the ports goes to any state , is that true? 2-why would the...