Webcast with George Stefanick: Lessons Learned Deploying an All-Wireless Office
(Live Webcast Tuesday Februaryr 14, 2016 at 11 am Pacific/ 1 pm Eastern / 8 pm Paris)
During this session you will have the opportunity to learn more about how to deploy a successful and reliable wireless office. The expert George Stefanick will share his hands on experience and best practices. So as the good, bad, ugly and hurdles that is needed to overcome for a successful and reliable process. As Wi-Fi speeds increase, some organizations are giving serious consideration to the all wireless office (AWO). The all wireless office, essentially cutting the cord for good, could be the next evolution of true Wi-Fi mobility in the enterprise.
Cost savings deploying an all wireless office
Management buy in and support
Client driver issues
Distinguishing Wi-Fi issues from server and application problems
Approach on a AWO RF design
Sniffing frames 24/7 with Omnipeek WiFi Appliance
Netscout tool bag for design, maintenance and troubleshooting
Setting user expectations
Picking power users
Taking what we learned at AWO and deploying in large scale enterprise
George Stefanickis a Wireless Architect employed by a large healthcare system in the Texas Medical Center. His Wi-Fi engineering experience spans nearly two decades and in that time he has provided consulting to many Fortune 500 companies in industries such as healthcare, mining, and hospitality. He maintains a popular Wi-Fi engineering community, the blog MY80211.com and he holds many vendor and vendor neutral certifications.
Also, he has been Technical Editor for two books related to Wireless Network technology: ”CCNA Wireless Study Guide” by Todd Lammle and ”Designing and Deploying 802.11 Networks: A Practical Guide to Implementing 802.11n and 802.11ac Wireless Networks for Enterprise-Based Applications” by Jim Geier .
As a member of the Cisco Support Community, George has been awarded with a Cisco Designated VIPstatus, a recognition that Cisco bestows upon the most valuable and influential members of their official technical support community.
We look forward to your participation. Please Share this event in your social channels.
Are you a Cisco customer or partner and have a technical question? Get answers before opening a TAC case by visiting the Cisco Support Community.
Hi,i deployed a IPV6 over PPoE using autoconfiguration over a Cisco 1941 Router, using the interface gigabitethernet 0/0I can ping google from the console terminal: Router#ping www.google.comTranslating "www.google.com" domain server ...
Hi Expert, I am novice in SD-WAN Viptela, recently i am trying to make some use cases like policy implementation, making device templates, App Aware policy, DPI, hub spoke topology etc, means all the possible use cases. Could you please guide m...
I would like to send default traffic from a VLAN out one egress interface and traffic from the same VLAN with an RFC1918 destination out another interface. The problem is, the WAN device is a Meraki and I dont think that I can use prefix lists and route-m...
Hi all,I am designing an almost isolated network which consists of a VPN stack (a firewall + router) connects to another firewall which hosts all these VLANs that connects to a layer 2 switch (attached is the raw diagram). so for routing should I jus...
When entering any command into the console, the output in my putty session is delayed, even when spamming enter for a new line, it will take some time for the console to catch up. This switch isn't connected to the network, it is just on my desk. The...