cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
296
Views
0
Helpful
1
Replies

Posture Condition via RestAPI

SzantaiNorbert
Level 1
Level 1

Dear All,

Is it possible that ISE Posture conditions are not managable via API? I could not found them neither in the ERS API Guide nor in the OpenAPI Guide.

Regards,

Norbert

1 Accepted Solution

Accepted Solutions

Believe this to be correct, there's no direct mention of managing ISE Posture conditions through the Cisco ISE APIs in the official documentation. Suggest to raise this with your AM to see if this on the roadmap for this product.

Hope this helps. 

Please mark this as helpful or solution accepted to help others
Connect with me https://bigevilbeard.github.io

View solution in original post

1 Reply 1

Believe this to be correct, there's no direct mention of managing ISE Posture conditions through the Cisco ISE APIs in the official documentation. Suggest to raise this with your AM to see if this on the roadmap for this product.

Hope this helps. 

Please mark this as helpful or solution accepted to help others
Connect with me https://bigevilbeard.github.io