08-06-2017 02:13 PM
How to make good sizing for FlowCollector Virtual appliance for several Cisco Nexus 7710 switches?
How many FPS is needed?
08-14-2017 03:17 PM
Dejan,
First make sure that your Nexus 7K supports Flexible NetFlow. That dependent on the software it's running. Next figure out what interfaces you want to export flow for. On the 7K that's usually VLANs. The 7K can generate a lot of flow records because it moves a lot of traffic. Finally check out this site:
Free Visibility Assessment - Cisco
Fill out that form and request the Stealthwatch UDP Director trail. You'll be contacted via email with download and install instructions for the UDP Director. Once that is set up and NetFlow from your 7Ks is exported to it; the UDP Director will report on how many flows are being exported.
I hope this helps.
Brian
08-17-2017 07:47 AM
Dejan,
In addition to the information Brian provided on how to get an eval UDPD so you can measure the volume of flows that your Nexus will generate, our documentation for the FC virtual appliance details the resource requirements that the vm will need based on several factors such as the fps rate, number of exporters and host count.
Here is the relevant information from the FCVE installation guide:
Let us know if there are any further questions regarding the sizing requirements of the FCVE's.
Chris
Sr StealthWatch Support Engineer
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide