Signature Updates - used to update the signature level on the IPS ex. IPS-sig-S392-req-E3.pkg
Recovery images - used to upgrade the recovery partition ex. IPS-K9-r-1.1-a-5.0-1.pkg
System software - used to re-image the application partition ex. IPS-4240-K9-sys-1.1-a-5.0-1.img
System software upgrade - used to upgrade the application partition ex. IPS-K9-maj-5.0-1e-S149.rpm.pkg
System software patches - used to patch the application partition ex. IPS-K9-patch-6.0-5p1-E3.pkg
System software ISOs - used to re-image the entire device (only applicable for those older IDS's with CD-ROM drives) ex. IPS-K9-cd-1.1-a-6.0-1-E1.iso
E3 means Engine Update 3 r means recovery partition a means application partition req means requires maj means major update cd means that you can create a cd from this ISO p1/patch means patch 1 sys means system software S# means signature level # e means an update to that version. (ie. 5.0-1e is the next iteration of 5.0-1. There was a 5.0-1a, 5.0-1b, etc)
I have a new deployment of FMC managed FTD and have a question regarding Native vs Container instances on the 4100The documentation says "Native instances cannot use VLAN subinterfaces or shared interfaces."I plan on trunking multiple vlans into the firew...
Dear All , I am sorry if this was asked before. I have an ASA 5505 currently running an EASYVPN tunnel behind a dynamic IP service with double NAT ( and having the ASA at the ISP router is not possible BUT they added the ASA on DMZ s...
Hi, i am using this FlexVPN "Hub to Spoke" configuration for my home lab hub router its using Keyring pre-shared key, and AAA is done locally. This work fine when the client is a router. However I want to modify this so that remote clients ...
Hi Experts,We're running ISE 2.6 with Patch 8 installed. AnyConnect is 4.8 and the Compliance Module is 4.3.X. I've been asked to configure a New AV Posture policy Definition check for Windows Defender. Name: AV_Def_5daysCompliance Module: 4.X ...