A SPAN is configured with source and destination interfaces, specified by the monitor command. The SPAN destination interface requires no configuration. The monitor session commands control VLAN tagging.
For example, to copy all traffic on Gi1/0/1 to Gi1/0/33 and maintain dot1q tags, you would implement the following configuration:
Hello. I'm trying to implement a tunnel between two endpoints in a IPv6 network, using IPSEC.The tunnel establishes correctly: I used wireshark to see the IKE packets during the negotiation.The problem is, pings are not going through the tunnel correctly....
HiAmy ideas whats causing this please |i have recently added a new Cert on the other end of the tunnel RTR. ?? .May 21 16:48:11.108: %CRYPTO-4-RECVD_PKT_INV_SPI: decaps: rec'd IPSEC packet has invalid spi for destaddr=X.X.X.X, prot=50, spi=0x4E128779...
Radius server configuration for 802.1X
Server radius test1
Address ipv4 10.1.1.1
Server radius test2
Address ipv4 10.1.1.2
aaa group server radius TEST-gr
server name test1
server name test2
Umbrella’s cloud-delivered firewall (CDFW) is a cool features that provides Firewall Services in the Cisco Umbrella Cloud without the need to deploy on-premises firewall devices and visibility and control for internet traffic across all branch offices. To...