Configuration of DHCP feature on the Pix firewall.
The Dynamic Host Configuration Protocol (DHCP) daemon must be enabled to listen for DHCP client requests.
When the PIX Firewall acts as a DHCP server, PIX provides network configuration parameters to DHCP clients. Dynamically assigned IP addresses are an example for network configuration parameters. These configuration parameters provide a DHCP client with the networking parameters necessary to access an enterprise network and network services like the Domain Name System (DNS).
The DHCP server on PIX does not support failover. If a DHCP server runs on PIX, the MAC address-to-IP address bindings are not replicated to the secondary standby unit. Therefore, if the secondary standby unit becomes active, the secondary unit can hand out IP addresses that the primary unit has handed out already.
Unfortunately, PIX has limited functionality in the context of DHCP. You cannot configure DHCP reservation on PIX. Routers and servers can handle DHCP reservation. PIX can only work as:
DHCP client support within the PIX Firewall is designed for use within a small office, home office (SOHO) environment using a PIX Firewall that is directly connected to a DSL or cable modem that supports the DHCP server function.
* The PIX Firewall DHCP client can only be enabled on the outside interface.
hi,i can't seem to install anyconnect 4.7 on a spare windows 7 machine.i already uninstall anyconnect 3.1 and restarted PC.after the EULA i got this message prompt. see attached photo.once i clicked OK a few times, i got a prompt that installation was com...
Hi Everyone, I just read that Google Gsuite expose also an LDAPS connection, I would like to know if anyone had a chance to test it and eventually if it allows to retrieve Google identity attributes (groups, etc) with Cisco ISE. I am considering...
Is it possible to quarantine mails based on the threat category? I can see in the message details an entry "Threat Category: Phishing" and in the SMA I can search for them in the Sender Domain Reputation report also in the message tracking , but how ...
I have searched Cisco and online for docs showing the syntex for natting multiple hosts via command line. I can do it via ASDM, but want to know how to do it via CLI so the running-config does not show "DM_inline" making the configs look more complicated....
When performing Wireless EAP-TLS using machine certs on ISE, if you are not requiring CRL check does the ISE server, WLAN Controller or wireless client need network communication to the Certificate Authority? The CA is an internal CA and not accessible fr...