This document explains configuring AD user as ISE GUI admin.
Components used - ISE 1.3 and Win2008 AD.
Background Info- To ease administrator overheads and manage network efficiently it is required to delegate some specific task to support staff . To achieve this ISE offers various preconfigured Admin Groups/roles allowing access permission to specific menu or tabs.
Before setting it up make sure ISE is connected to Active Directory.
Step1 Create admin user
Step:2 Check External check box make it a shadow user. Password field is not required as it will be checked against AD. Assign user to MnT admin group
Step 3 Create user in AD
Step 4 Verify user shows up in MnT Admin Group. Check Type External if group authorization is needed on the basis of active directory user group.
Hi,I am just wondering, do we need to allow in a firewall rule a DHCP traffic if my firewall is setup with DHCP Relay for my LAN?For example, LAN-10 <-----> Firewall <---DHCP Relay---> DHCP Server.In my understanding, no need since the firewal...
1. cisco Nexus5548 version 7.3(5)N1(1) S1(config)# ssh ?
key Generate SSH Key
login-attempts Set maximum login attempts
S1(config)# sshthere is no command to disable or change dh groups like IOS 2.Cisco IO...
Hi Folks, We build a IPSec tunnel from a router remote site to ours central site router. We have a corporate Firewall (ASA) protecting our central site... To acomplis this task we made on ASA a one-to-one Static NAT and a inbou...
Hello,Occasionally we will get the Retrospective verdict received emails from our IronPort C300V. However, sometimes when we copy and paste the SHA256 hash in to the message tracking to have a closer look at the message, it comes back as not found. Is the...
Hello Team, we have Cisco ISE PAN, SAN and 6 PSN.. PAN , SAN and few PSN are showing around 100% memory utilization.. but not giving any error. Recently we have installed certificate on PSN and due to that they have rebooted as well but sti...