I have ASA 5506W and everything work great without any issue by access from ASDM or SSH, however I am unable to access FMC via web browser then getting following error message "Onbox NGFW is managed by ASDM. Please use your ASDM Client or download the client and use your ASA IP address to login.", does anyone know how to fix it?
Below is some info:
Production software version 6.2.3
Inside IP 192.168.111.1/24
Management cannot have same subnet as inside interface, however it direct connect to one of bridge-group inside interface port, sfr server IP 192.168.111.2/24, does I really need different subnet for management interface?
I am wondering how to create an ACL for this scenario:LAN-A connected to Router-1 on fa0/0 and subnet is 126.96.36.199/24LAN-B connected to Router-1 on fa0/1 and subnet is 188.8.131.52/24 ACL requirement:LAN-A can initiate and continue the conversat...
Question I have a Cisco ISE 2.6 rel. and i need to monitor his cpu, ram and storage trought my NMS Nagios. i configured correctly snmp v3 on cisco ise and from nagios side it can be pinged or snmpwalk to see entire mib. Are there oid that p...
there are two Tunnels in NSX edge 1- one between NSX to branch ( Sophos FW ) and it is working fine no issue 2- another one in the same NSX and other sites ( Sophos ) also and we have some times ( 3-4) disconnection ...
I'm reviewing a CISCO CES configuration. There is a profanity dictionary, however it doesn't seem to be used or working. How can I determine if any filters or other settings use a particular dictionary?
Hi All, I have a scenario. We have a VOIP server. VoIP is only accessible publicly for specific ips. i have users sitting on remote location.When they connect with vpn they can configure their soft phones with VOIP private ip but they cannot configur...