Port speed issue

[kiran.sn]

Hi All,

Am I getting the following error on more than one port while changing the port speed from 2G to 4G on 9509.

Event:E_DEBUG, length:121, at 43883 usecs after Thu Jan 8 15:02:27 2009 [102] Ifindex (fc8/8)0x1387000, Err disabled (0x40290065) event (PI_FSM_EV_LCP_SET_PORT_CFG_RESP_RCVD)0xb8 due to Elsspc

Switch is working fine @2G. All other ports are set to 2G (Shared)

Any suggestion..?

[Michael Brown · Accepted solution]

Check the SFP installed in port 8/8 to be sure it is 4GB capable.

If it is, repost and we can dig deeper.

Hope this helps,

Mike

[KevinBeaulieu]

Hello,

What model line card is it? What else do you have pulled into the port group and running at what speed?

Thank you.