Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Please find the attached Diagram for Reference:We have our own APNIC pool which we have advertised to ISP-1 and ISP-2 as shown in diagram.On ISR routers we are Advertising 1.1.1.0/24 to ISP-1 and ISP-2 via EBGP and receiving Default route on both ...
Hi All, After a long debate with my colleague for the topic mentioned here. For any Enterprise Network: what would be the Pros and Cons for Terminating Internet lease lines on ISR Routers vs Terminating Internet Lease lines on Next Generation Fir...
Hi All, have a issue with WAN IP not reachable from Internet. Topology Details: Two ISPs connected to Single Cisco Router with Public IP configured respectively [ Refer attached diagram]Default route to ISP1 with IP SLA tracker with Ad 1Secondary Def...
Hi All, Have a query regarding IP SLA tracking to track Internet services. We have Two ISPs and have configured IP Sla tracking [Tracking 8.8.8.8 and 1.1.1.1] for Iink failover. Lately have noticed 8.8.8.8 and 1.1.1.1 are giving Packet drops even tho...
Hi All, I was wondering what is the best practices followed for Enterprise WAN connections in the following scenario1) Own APNIC Public IP pool2) TWO ISPs for Redundancy (Multi-homed)3) ISR routers being used for BGP with both the ISPs (Edge route...
Thanks for the reply sir, I'm using default IP SLA config on Cisco ISR 4451 router, i agree with your statement, what is the ideal time value to track a IP before considering for IP Failover.
Thanks for the reply, Surely will try tracking 1.0.0.1 for few days and check the performance.But just wanted to what is the industry best practices to track Internet ( Best IP to track in IP SLA)
i was just complicating by trying to use log of BGP parameters. Solution:we just have to use AS path prepend for selected prefix on DC from CE to PE router outno need to configure any thing on remote side. (Assuming Link1 as default primary for all...
