Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I would like to find an Aironet indoor AP that will operate in Mesh mode with wireless backhaul. Looking at the compatibility matrix for 8.5.182.x I need to stick with 1600, 1700, 1800i, 1810 OEAP, 1810W, 1815i, 1815m, 1815t, 1815w, 1830, 1850, 2600,...
I am attempting to migrate my 1572 APs to an updated WLC 2504 running 8.5.151.0. This is for my home lab network.1572s were working on 8.0.152.0 now they continually disassociate while trying to download the new image. I found Community posts that co...
I have a 2500 WLC and a LAP1522 AP operating as the RAP. I loaded the LAP software onto a LAP1242. I added the LAP1242 MAC address to the WLC list. With the ethernet connected the LAP1242 registers with the WLC, broadcasts the SSID and all works well...
HelloI've been working on setting up a 2504 WLC to operate a mesh of 1522 APs. I have the components talking to each other. My trouble is when setting up a new interface to support an SSID on the AP. My router is 192.168.0.1 it is acting as the DHCP....
I purchased an Aironet LAP1522AG-A-K9 access point. i have not reset the unit but I believe it was unused. I have the AP powered up on dc power. The poe in port is plugged into my router. I see the AP up on my router utility with an IP 192.168.0.33 t...
Thank you for the info Scott. I have a garage that doesn’t have wired network and the walls and ceiling are concrete. I had an older 1200 series AP that I used a directional antenna to point out the garage door window towards an outdoor AP. The 1200 ...
I found my mistake. Caught on the AP console log that certificates on two of the 1572s had first valid dates of 7 Dec 2022. When I was setting the date manually to 2 Dec 2022 per the boot loop bulletin I was causing 2 of my APs to fail to download. T...
I had thought the same thing. I remember reading this doc. I think maybe you had sent it. I had set the date to 2 Dec 2022 and let the controller run all night. Still no luck. Only when watching the AP log this morning did I catch..."certificate not ...
Leo, I'm pretty much a novice. How do I find the correct tar file for the AP? Can I upload it from the WLC or is it a file I would have to get from Cisco support? I used a tftp server to upgrade the WLC and have consoled into the APs, but I'm not sur...
While upgrading a Cisco 2504 WLC from 8.0.152.0 to 8.5.182.11I had a single 1572AP powered and connected to ethernet to be the Mesh RAP. It immediately joined the WLC when it rebooted with the updated 8.5.182.11 IOS With the WLC stable running 8.5.18...
