About TanurajSaha25120

TanurajSaha25120 · 07-09-2020

Dear All,I have deployed cisco WLC 9800-L recently. APs have already joined with WLC and clients are also getting IP from the WLC as DHCP pool has been configured in WLC. But the problem is WLANs are frequently keep shifting, like the WLC is broadca...

TanurajSaha25120 · 07-15-2020

Sorry everyone for late reply. Finally the issue was solved. Actually i have made two major changes. First of all, i have connected the AP through wireless management vlan. Then the AP was trying capwap discovery to get the WLC and it gets joined wit...

TanurajSaha25120 · 07-13-2020

Is there any License related issue? How many AP can be joined in evaluation mode?

TanurajSaha25120 · 07-12-2020

Dear Scott,This is the current log as per your suggestion. BootROM - 1.78Booting from SPI flash, Secure modeBootROM: RSA Public key verification PASSEDBootROM: CSK block signature verification PASSEDBootROM: Boot header signature verification PASSEDB...

TanurajSaha25120 · 07-12-2020

AP Model (Cisco 2802i). Both APs are same model. One AP has been joined and working fine but other AP is not joining the controller.Here are the logs from AP console below : Starting kernel ...[01/01/1970 00:00:00.0000] Built 1 zonelists in Zone orde...

TanurajSaha25120 · 07-09-2020

Thanks a lot Scott for your reply. Basically, Client's requirement was to get different IP's for different SSID. So what we did first, we configured different vlans (like vlan11(10.10.10.0/24 for WL-1 and vlan12(10.10.20.0/24 for WL-2). These vlans a...

Member Since	‎03-05-2020 05:47 PM
Date Last Visited	‎01-20-2021 07:09 PM
Posts	9

User Statistics

User Activity

Cisco WLC 9800 - SSIDs keep shifting frequently from client device

Re: More than one AP is not joint WLC 9800

Re: More than one AP is not joint WLC 9800

Re: More than one AP is not joint WLC 9800

Re: More than one AP is not joint WLC 9800

Re: Cisco WLC 9800 - SSIDs keep shifting frequently from client device