Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to establish inter vlan connectivity between two 3850 switches. I setup a test environment in my private lab as follows
Switch 1
VLAN 116 10.1.16.254 (PC1 on this nertwork - 10.1.16.1)
VLAN 131 10.1.31.254 (PC2 on this network - 10.1.31....
Thanks it worked Joseph. Later I erased all the config and did all this by stacking the switches and that also worked without any manual routes. But apart from this I want to go step further with below scenario.
I have 2 stacked Cisco 3850 Switches a...
OK. VLANs are communicating with each other now. I did stack the switches and made as on entity and configured VLANs and enable "IP ROUTING". Up to here all the communication is good. Addition to this I want establish something more.
I have 2 stacke...
I have multiple VLANs on Switch 1 (3850) and multiple VLANs on Switch 2 (3850).
Switch 1 VLANs talking to each other and same in case of Switch 2.
But VLAN from Switch 1 is not communicating to VALN on switch 2 and vice versa. I make gi1/0/48 as TR...
Hi tried your configuration in Packet tracer with 3560 Switches by creating 116, 131 vlan on switch 1 and 132, 230 on switch 2 with some ports assigned to both the vlans. And enabled Ip Routing. One PC is connected to each vlan in both the switches.
...
