Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Wanted to see the NTP servers configured for a UCS. If anyone wants to edit up a version that can read a list of UCS IP's and report back all NTP servers per UCS, that would rock. Thanks!Hope this helps someone on their path towards enlightenment.## ...
6100 Series UCS. Cisco UCS Manager - 2.0(1w)We use TACAS for authentication. All is good, until recently when tryong to connect to KVM getting:Tried resetting KVM on blade, and have cleared stail logins to UCS. Anyone run into and gotten past this?Th...
On my Nexus 5k seems that ACL for "in" (garden_IN) is allowing ports needed. But for "out" (garden_OUT) unless established is ANY this does not work. Usually I do established with same port number. Is this right? Have not had to use any before. Garde...
Can a KVM be directly connected to?I know there is the nice "Launch KVM Manager" setup. But have a client would just like to give URL's to their KVM's and keep their awareness of UCS "limited". URL's to their KVM's would be ideal. I tried the below a...
It is always best to be 100% SAN. 2.1(2f) will run a little better but will not fix the issue. I would try downgrading the code on the blade to 2.0(x) and seeing if that fixes the issues.
On 6200 series FI's after updating from 2.0x to 2.1x RPM based linux systems stoped booting for me. Debian systems have not had the issue. This is with M3 blades. My fix was local drives since only one server was effected and I had drives around. Wha...
Are there UCS Podcasts out there? Sounds good to me, please post. Link to a google hangout I would like to see more of on UCS Tips and tricks for managing Cisco UCS with PowerShell and Microsoft Systems CenterRead more: http://realworlducs.com/tips-t...
