Hi Everybody, I'm still a bit new to working with Cisco equipment, I've been studying for my CCENT over the past few months and I've decided to get some Cisco gear in my home to manage my home network. I have a web server running on my LAN currently and I'm trying to get everything on port 80 forwarded to the webserver. Here's what I have so far: Current configuration: ! version 12.1 service timestamps debug uptime service timestamps log uptime no service password-encryption ! ip subnet-zero ip dhcp excluded-address 10.1.1.1 10.1.1.19 ! ip dhcp pool main network 10.1.1.0 255.255.255.0 default-router 10.1.1.2 dns-server 220.127.116.11 ! ! ! ! interface FastEthernet0/0 ip address 18.104.22.168 255.255.248.0 ip nat outside duplex auto speed auto ! interface Serial0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 10.1.1.2 255.255.255.0 ip nat inside duplex auto speed auto ! ip nat inside source list 100 interface FastEthernet0/0 overload ip nat inside source static tcp 10.1.1.22 80 22.214.171.124 80 extendable ip classless ip route 0.0.0.0 0.0.0.0 126.96.36.199 ip route 188.8.131.52 255.255.248.0 FastEthernet0/0 ip route 192.168.1.0 255.255.255.0 192.168.1.1 ip route 192.168.1.0 255.255.255.0 10.1.1.20 no ip http server ! access-list 100 permit ip 10.1.1.0 0.0.0.255 any access-list 100 permit tcp any host 184.108.40.206 eq www <snip> end I've done quite a bit of reading but I can't pin down what the problem is - I suspect it might have something to do with access lists (I'm not entirely familiar with this topic, if there is a good post that explains it, please let me know!) But all in all, I'm not really sure whats going on. The server is listening on port 80 and I can access it while on the LAN, but attempting to access it using my WAN IP fails. Thanks for any help you guys can provide!
... View more