About rpsribeiro

rpsribeiro · 02-10-2013

Hello,I'm trying to made a VPN Connection between a Cisco ASA 5510 with appliance 8.2(1), and the VPN is established i receive traffic i see the responses come to firewall but this responses never came to the destination, sometimes in the ipsec sa s...

rpsribeiro · 06-09-2011

Hello all,i've an Cisco ASA 5510 with Security Appliance Software Version 8.0(2), in this ASA i've many L2L tunnels to this ASA, anda sometims new tunnels can't connect, the older tunnels still ok and working, yesterday this situation occured again a...

rpsribeiro · 05-28-2010

Hi,i'm configuring a ASA 5510, i've the following partial configurationinterface ethernet 0/1 nameif Outside_net2 security-level 0 ip address 10.0.2.2 255.255.255.0!interface Ethernet0/3 nameif Inside_vlans security-level 100 ip address 192.168.10....

rpsribeiro · 02-11-2013

I've already checked the routing an its ok.Here's the capture you ask: 8: 00:57:41.337888 10.35.100.1 > 10.35.105.253: icmp: echo reply Drop-reason: (inspect-icmp-seq-num-not-matched) ICMP Inspect seq num not matched 25: 00:57:45.831042 10.35.105.2...

rpsribeiro · 06-01-2010

Thank's for the response, i added de inspect icmp without any nchanges and the solution works.

Member Since	‎03-15-2007 05:56 PM
Date Last Visited	‎09-07-2018 12:03 AM
Posts	6

User Statistics

User Activity

Problems between ASA 5510 and Draytek 2820

Cisco ASA 5510 Ipsec stops working

Pinging through ASA 5510

Problems between ASA 5510 and Draytek 2820

Re: Pinging through ASA 5510