Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I Have a question regrading anyconnect NAM.ISE: 2.6 Patch 5Endpoint: windows 10 Authentication : EAP-FAST Mahcine ( EAP-TLS ) User ( EAP-MSCHAPv2 ) with EAP-Chaining. if for some reason the endpoint has an issue and i need to authenticate it u...
I really don't want to change the order or the priority as most of the devices are DOT1X and it's more secure to start with DOT1X anyway. Is it possible it's got something to do with the Network Access Profile Editor?
The switch said Dot1x Running for about 21 seconds and then it fall to mab but then immediately return to Dot1x ( after 1 second). I Configured this endpoint to fail on DOT1X on purpose to see if it fall on MAB, but it never gets network connection.
Here is the config:interface GigabitEthernet1/0/1switchport access vlan 50switchport mode accessauthentication control-direction inauthentication event server dead action authorizeauthentication event server dead action authorize voiceauthentication ...
