About JukkaKahkonen46953

JukkaKahkonen46953 · 04-09-2020

I try configure old Cisco 877M. Yes, I know, it is old product. But, no idea byu new and make just same steps and found same problem. I want use 877M as router. WAN is 4G-modem. LAN is my home-office-mini-network. 4G modem is connected to FE0. Config...

JukkaKahkonen46953 · 04-09-2020

OKAY! NOW it works!It important point was subnet mask. It was so simple: dhcp pool 100.0.1.0/23. Mask is 255.255.254.0 and... now when I use dhcp, "ipconfig -all" show it as it must, 100.0.1.2 etc. Manually I can put 100.0.0.2. JUST as I want :).!ver...

JukkaKahkonen46953 · 04-09-2020

Thanks. Connection to internet work.One important: 877M is old ADSL router. This is important: IT IS NOT POSSIBLE USE FASTETHERNET-PORTS AS WAN-PORT. Only acceptable WAN-port is adsl-hole. https://www.experts-exchange.com/questions/27869898/Configure...

JukkaKahkonen46953 · 04-09-2020

ip route ip route 0.0.0.0 0.0.0.0 100.0.0.1: "Invalid next hop address, it is this router". 100.0.0.0 ok, but really cannot know work it or not.ip nat inside source list {YOUR LIST} {Interface, such as Gi 0/1} overload ... instead this:interface Vlan...

JukkaKahkonen46953 · 04-09-2020

Hmm... in my opinion in my configuration contain NAT. Using google I cannot found any other configurations for NAT. Maybe this configuration is "out of Cisco documents"? So, in my opinion, in my config NAT is ok. Or... any secret link in internet tel...

Member Since	‎04-09-2020 09:27 AM
Date Last Visited	‎04-12-2020 06:24 AM
Posts	5

User Statistics

User Activity

Router basic configuration 877M

Re: Router basic configuration 877M

Re: Router basic configuration 877M

Re: Router basic configuration 877M

Re: Router basic configuration 877M