Point is that my configuration is basically working and switching from ISP1 to ISP2 and back to ISP1 is OK, but in some cases (and I can't understand in which exactly), switchover from ISP2 back to ISP1 fails because IP SLA can not reach the target I...
no, the change I made earlier worked for that dialer.And when I connected the cable, they both got up and the call worked.but since it simulates the fall of dialer1, removing the cable, it fails using dialer2.
ahhh it was upside down thisno ip route 0.0.0.0 0.0.0.0 Dialer1 2 track 1no ip route 0.0.0.0 0.0.0.0 Dialer2 track 2ip route 0.0.0.0 0.0.0.0 Dialer2 2 track 1ip route 0.0.0.0 0.0.0.0 Dialer1 track 2 it works now!! :) :) Thank you very muchI am going...
Hello againI have applied the changes you tell me and the call is still not made.I have verified that now:show ip routeGateway of last resort is 80.58.67.111 to network 0.0.0.0S * 0.0.0.0/0 [1/0] via 80.58.67.111 is directly connected,...
Thank youI attach the running configRight now the gigabitethernet port 9 has the cable disconnected.But dialer 1 does not work properly.Ping 8.8.8.8 is correct, but if I try to call a video conference that I have connected it does not workFor it to w...
