About nelsonpaiva

nelsonpaiva · 05-02-2020

Hi! I have been labbing today about a case I saw at work the other day. The Challange was that one Router (SiteA) needs to have 2 IPSEC tunnels to different sites, one of them with a overlapping subnet. I was able to get this working on my lab by doi...

nelsonpaiva · 05-25-2020

I found out how to successfully NAT the whole subnet, only when going to the tunnel to Site C, on the site A Router I removed this line: ip nat inside source static 192.168.1.1 172.16.0.1 route-map NATTUNEL And made the following config: ip nat poo...

nelsonpaiva · 05-02-2020

Indeed it does, however I can´t insert the route-map at the end of that command, giving it a conditional match:Which means it will always be translated. The tunnel to site C will work, but it will fail to site B.

Member Since	‎05-02-2020 09:45 AM
Date Last Visited	‎09-01-2021 12:05 AM
Posts	3

User Statistics

User Activity

LAB Study Case: 2 IPSEC tunnels, with overlapping subnet to one of the sites.

Re: LAB Study Case: 2 IPSEC tunnels, with overlapping subnet to one of the sites.

Re: LAB Study Case: 2 IPSEC tunnels, with overlapping subnet to one of the sites.