Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have installed two XRv routers with MPLS and LDP configuration. However, I cannot find MPLS or LDP neighbors and the routing table does not have the MPLS protocol.RP/0/0/CPU0:AGG-1#ping 10.1.1.2 Success rate is 100 percent (5/5), round-trip min/avg...
Boa noite!!Subi dois routers XRv com configuração MPLS com LDP. Contudo nao consigo vizinhança MPLS, LDP e a tabela de roteamento não tem o protocolo MPLS.RP/0/0/CPU0:AGG-1#ping 10.1.1.2 Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1...
BGP does not have a neighbor with the peer. It is not in the routing table.I think it may be something with the image.RP/0/0/CPU0:ISP#sh runnFri May 2 13:04:06.978 UTCBuilding configuration...!! IOS XR ConfigurationRP/0/0/CPU0:SP#sh routeFri May 2 13...
HaroldI didn't pay attention to the router-id configuration.The simple configuration was the main issue.RP/0/0/CPU0:AGG-1#show mpls ldp neighborFri May 23 17:25:20.273 UTCPeer LDP Identifier: 2.2.2.2:0TCP connection: 2.2.2.2:30007 - 1.1.1.1:646Gracef...
I configured OSPF and advertised L0. MPLS still does not appear in the routing table.RP/0/0/CPU0:AGG-1#show mpls ldp interface briefFri May 23 15:10:49.826 UTCInterface VRF Name Config Enabled IGP-Auto-Cfg TE-Mesh-Grp cfg--------------- -------------...
Obrigado Assis!!Baixei e estou tentando botar para rodar, ainda não consegui colocar a gerencia GUI para funcionar.Mas saber que é possível simular o ACI é ótimo.
Bom dia, @Assis Teixeira obrigado pelas informações.Infelizmente a segunda alternativa para simular depende de uma Id partner o que infelizmente eu não tenho. https://software.cisco.com/download/home/286283149/type/286283168/release/6.1(3f))
