Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an IDS4215, i have tried to update the signature through FTP and through IDS MC without success. I need a proceedure on how to achieve this both ways!!
This is my running config, how can i add vlan 50 to standby group 6?interface Vlan40 ip address 128.224.40.3 255.255.255.0 ip helper-address 128.224.76.253 no ip redirects standby 6 ip 128.224.40.1 standby 6 preempt!interface Vlan50 no ip address ip ...
Please i need help on this, I want to put multiple vlans in 1 HSRP group, what will be the virtual IP's of each VLANs. I have use secondary IP's on the rest vlans in the group but is now working. I want to know what virtual ip that will be assigned t...
I have 2 Cat 6509 that i have configured for HSRP for 16 VLANS, how do i resuse a group number since i am limited to 16 groups and my Vlans is more than 16. thanks
I have a Catalyst 6509 swicth with Supervisor Engine 2 with PFC2 and MSFC2. I have more than 16 vlans group that I want to connect on HSRP. How do I mapped 2 or more different VLANS IP Address to a virtual IP Address of a group?Please i need urgent r...
Hi sachinrajaThank you for the information, I have carried out what you suggested on both IDS and I am getting the same out put as below but when I try to upgrade the IDS sensors using the IDSMC, It looks as if it is upgrading but it is not. The proc...
This is my running config...pls i need urgent hlp on thisThis is my running config, how can i add vlan 50 to standby group 6? interface Vlan40 ip address 128.224.40.3 255.255.255.0 ip helper-address 128.224.76.253 no ip redirects standby 6 ip 128.224...
Yes I did have another router with 128.224.40.2 I made a mistake on my vlan 50 interface the ip addres is 128.224.50.3 and i have another router with 128.224.50.2interface Vlan40 ip address 128.224.40.3 255.255.255.0 ip helper-address 128.224.76.253 ...
This is my running config, how can i add vlan 50 to standby group 6?interface Vlan40 ip address 128.224.40.3 255.255.255.0 ip helper-address 128.224.76.253 no ip redirects standby 6 ip 128.224.40.1 standby 6 preempt!interface Vlan50 no ip address ip ...
