About helpdesk-dges

helpdesk-dges · 01-05-2017

Hi there, When i try so do a "snmpwalk -v2c -c community ip_address" it always gives me "SNMPv2-MIB::sysDescr.0 = No more variables left in this MIB View (It is past the end of the MIB tree)". Even if i put some OID in front it gives me that. Than...

helpdesk-dges · 01-11-2017

Thanks Freerk. SNMP is configured: (Cisco Controller) >show snmpversion SNMP v1 Mode.................................... Disable SNMP v2c Mode.................................... Enable SNMP v3 Mode.................................... Enable (Cis...

helpdesk-dges · 01-06-2017

Thanks Freerk. SNMP is working and everything is configured properly, but can't get snmpwalk to work with it. Pedro.

Member Since	‎01-05-2017 09:13 AM
Date Last Visited	‎01-31-2020 05:33 AM
Posts	3

User Statistics

User Activity

snmpwalk on WLC 2504 gives no results

Thanks Freerk.

Thanks Freerk.