About amr2020eg

amr2020eg · 04-10-2018

I am preparing configuration to support below requirements Subnet1 172.29.3.0/25 use dialer1 internet link Subnet2 172.29.3.128/25 user F0/1 internet link Both subnets connect to HQ through s0/1/0 This is the new configuration which i have create...

amr2020eg · 01-08-2017

i have 2 ISPs connected to my network and VPN connection with HQ i have 2 subnets on this branch, i want 172.29.3.0 255.255.255.128 to go through dialer1 and 172.29.3.128 255.255.255.128 to go through FE0/1 which connected to adsl modem below is co...

amr2020eg · 01-23-2017

Hello Richard, 1. You are right internet access is working on second subnet but can't reach HQ 2. VPN is working on serial 0/1/0 3. These routes are for all HQ networks Regards, Amr

amr2020eg · 01-22-2017

Dear Richard, Please find below current configurations ip cefno ip dhcp use vrf connectedip dhcp excluded-address 172.29.3.1 172.29.3.10ip dhcp excluded-address 172.29.4.1 172.29.4.10ip dhcp excluded-address 172.29.3.129 172.29.3.139!ip dhcp pool Vo...

amr2020eg · 01-21-2017

Dear Richard, When i configure branch router, the first subnet 172.29.3.0 works fine but the other subnet 172.29.3.128 follows internet route-map correctly but can't reach HQ through VPN. Can you please give me any suggestions on that Regards, Amr

amr2020eg · 01-11-2017

Dear Richard, Many thanks for your support and explanations. it sounds working now on my testing environment. I will configure it on branch next available downtime Regards, Amr

amr2020eg · 01-09-2017

Hello blau grana, After applying the route-map on LAN sub-interfaces i can't access HQ VPN through Serial0/1/0.16. any help on that Regards, Amr

Member Since	‎01-08-2017 05:39 AM
Date Last Visited	‎04-11-2018 12:18 AM
Posts	12

User Statistics

User Activity

Load balancing over 2 ISPs based on subnets

ISP load sharing based on subnets

Hello Richard,

Dear Richard,

Dear Richard,

Dear Richard,

Hello blau grana,