Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey guys, I have 2 field switches, connecting to 1 core switch in the headend. The first field switch has devices on 192.168.130.1/23, the second field switch has devices on 192.168.132.1/23. They both are going to go back to one core switch in the h...
I have a Cisco 3850 that needs to talk to multiple Cisco C3650s.If I were to build 4 VLANs as below, how would I be able to get it all going on both the 3850 and 3650s? Trunking, tagging, access, modes, all that is just wearing me out. VLAN130 - 192....
Hey all,I'm at my end on this one, please someone help me! I'm working on a data-center-type of installation. I drew the current set-up, please see attached.In words here is what I'm trying to accomplish:1) Multiple cameras go to a Cisco 3650 in a ne...
@Richard Burts Rick,Excellent feedback, again, thank you very much. When it comes to accessing the servers holding the storage, these servers will have additional NICs that will be on a separate physical network that is a managed "corporate" LAN, if ...
@Richard Burts I apologize for any miscommunication on my behalf. Here are responses to your post. 1. The 192.168.130, 192.168.131, 192.168.132, and 192.168.133 were all requested by the customer.2. I agree, a single vlan may make this a lot easier....
Is this maybe possible with intervlan routing? Since all this trafffic will be local, and there is no router in the picture? Servers (recorders) are just plugged into the core to capture all the video feeds.Just doing some thinking out loud here.
@Richard Burts Thank you for the quick reply. Since you seem to understand what I'm getting at, let me expand to help you see the bigger picture, and then you can let me know what you suggest to move forward with. The field devices are all IP based s...
Paul, If I would like to seperate all 4 onto their each vlan, I will use the above commands you gave me, to create vlan 130, 131, 132, and 133.If I default the configurations on the ports, what do I need to tag onto each port? Also, on the other side...
