Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello guysI had deployed the following in my office networkASA 5510WLC 2504Aironet 3501In my office around 55 devices connect to internet (will increase by time) and the internet connection is painfully slow even though I have fiber optic link of 100...
My ASA5510 is connected to a time capsule (Apple router). Its configuratin is as follow:Ethernet0/0 interface Outside with security level 0. It is configured to get ip adr from dhcp. (It gets ip adr from Time Capsule)Ethernet0/1 interface Inside wi...
Hello guysBefore I put my question, let me give a brief descriptoin of my network;I am using a fiber optic connection. I want to connect it directly to ASA5510. A WLC2504 will be connected to ASA and one Aironet AP will be deployed at first. (At this...
Hello guysI am setting up wireless network in my office using WLC 2504. I have gone through the basic setup wizard but want to use GUI instead of CLI. But don't know how to bring GUI. As on my laptop I dont have serial port so console cable is connec...
Hi I first time configured ASA5510 and saved the settings. Now I wanted to make some changes in the configuration but not able to access the device.when I lauch ASDM launcher, it gives error "Unable to launch device manager from 192.168.1.1" I tried...
We dont have router at this time. Firber optic terminates in ASA5510 which is further connected to a layer two Cisco SG 100-16 Gigabit switch. WLC 2504 connectes to switch and Aironet 3501. All equipment is located in the same room.Whatever equipment...
Thank you Alain for all your help.I have tried the config you provided but for some reason it CLI does not accept -global(outside) 1 interface JOutsideSo after many fruitless tries, I set the firewall to factory default. Connected it directly to the ...
Thanks you so much for helping me out Alain.Here is show running-config command out put on my ASA5510JASA> enPassword:JASA# show run: Saved:ASA Version 8.2(5)!hostname JASAenable password y2YjIyt7RRXU24 encryptedpasswd 2KFQnbNI.2KYOU encryptednames!i...
Here is the configuration detail of ASA5510. I have attached screen shots.Moreover I have run ping test from my pc. My pc is connected to interface Inside and interface Outside is connected to TimeCapsule router. I can ping to the interface I am conn...
