Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,My Switch is c2950 and i am trying for a MAb Authentication using ACS .Please let me know will this switch supports and if not is there any way how to use this switch for MAb authentication.System image file is "flash:/c2950-i6q4l2-mz.121-22....
I have a ACS 5.0 and a router C5940 tried to authenticated it. When i put a debug tacacs the router displays "write to 11.1.1.5 failed with errno 257((ENOTCONN))" the connectivity is ok but the request doesn´t arrive to acs, the other devices work...
Yes the router is reachable...Also, I tried a sniffer on the network and confirmed that client/router is sending traffic to port 49 on ACS. ACS does not send to port 49 on client but to the source port for the original message. Infact i checked on ...
Hi,I have not enabled it .I am getting these messages when i turned on tacacs+ debug in the router*Mar 1 21:31:58.654: AAA/AUTHEN/START (4071980044): Method=tacacs+ (tacacs+)*Mar 1 21:31:58.654: TAC+: send AUTHEN/START packet ver=192 id=-222987252*...
