Hello Omar,Where do you see the UP-IDLE status?Does "sh cry session" status should that as the sessi...

KeithIn that case, you can convert the remote network 10.2.x.x to something else on the ASA by using...

Anyconnect client does support ipv6 feature.http://tinyurl.com/mw8nn3ORhttp://www.cisco.com/en/US/do...

Hello Keith,I read through your question and it seems like your side will need to encrypt only 10.0....

Hello,On the VPN concentrator, you can use the same network list "X-Local" for the new tunnel as wel...

Hello,I read through your problem description and have some queries.a. When do a ipconfig on the rem...

Hello Rechard,From the diagram you had sent, the branch ASA's are inside of the HQ ASA, is that corr...

Glad to be of assistance.

Try ASDM 6.1.5(57)

Hello,SSL/HTTPS connections that you mentioned, is it webvpn connections or Anyconnect client connec...

Hello Antonio,You have to put "ip nat inside" on your LAN interface and "ip nat outside" on your WAN...

Hello,IKEDBG with a severity of 1-9 should tell you the client type and the version they are logging...

Hello,On the router, you cant set a network mask for the pool - unfortunately. So, it will use the d...