Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am running PIX 525 6.3(3)4 interfaces 2 FE, 2 GE1 FE used for stateful failover1 FE will be used for DMZ1 GE inside1 GE outsideAttached to 6509I set GE-outside to VLAN 201 on the 6509 the fiber port it is plugged into is VLAN 201I set GE-inside to ...
Using IOS 3.2.2I have a local director 416 with 2 real servers. I would like to send all traffic to 1 server and if it fails to switch over to the secondary server. The way I see to do it is to use weighted load balancing and set the weight of the ...
We recently had a DDos attack on our network that flooded our network with UDP traffic taking our network and internet connections to a crawl. After this the effects were that random clients suddenly took up to an hour to login. We have 2 Cisco Cat...
Could I assign native vlan 201 to the inside interface and native vlan 216 to the outside? Does it have to be a dummy VLAN for any reason in particular?
Thanks for the quick responseIf what I want to accomplish is a failover rather than load balancing is this the "proper" way to do it with LocalDirector I.E. using the weight command to set a prefered server and then using backup command to perform fa...
