can you do a traceroute and see where the latency is being introduced? also a good check is to look at CPU and Memory levels since if they are choking you are limiting resources for control plane.
Hello, Are you talking about RSPAN or Local SPAN? Check this config guide for the same:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9200/software/release/16-9/configuration_guide/nmgmt/b_169_nmgmt_9200_cg/configuring_span_and_rspan.ht...
This will be expected if the wireless user is roaming around and will lead to mac flap i.e. learning of MAC on different ports. You can create a logging discriminator to ignore this.
## Make sure to mark post as helpful, If it resolved your issu...
your SUP is eol/eos : https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6500-series-switches/eol_c51-697975.html
you will not find IOS for the same.
## Make sure to mark post as helpful, If it resolved your issue. ##
RMA the switch POST is failing :
POST: PortASIC Port Loopback Tests : BeginPOST: Failed PortPhyLoopback Packet Test asic_index 0 port_hardware_index 23POST: PortASIC Port Loopback Tests : End, Status Failed
## Make sure to mark post as helpfu...