Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi guys, I have 2 interfaces on this PIX that are alive, an inside interface, and an outside interfaceoutside 200.200.200.10inside 192.168.120.0I can't seem to access anything outside.Global shows:global (outside) 1 200.200.200.10Nat shows:nat (insid...
I have 2 PIX connected via IPSEC. The 506 has an outside address of 10.x.x.x and its default route is a line of sight router on the same network. I conenct to the remote PIX using this method and can authenticate etc. Is there a way I can get the rem...
Hi guys I am trying to create an IPSEC tunnel between a 515 and a 506. Obviously it isn't working, otherwise I wouldn't be here The 515 has these entries for the tunnel:crypto map melbMap 22 ipsec-isakmpcrypto map melbMap 22 match address 22crypto m...
I t was a /28 and no, it didn't bark I have changed it to a /24 but still no luck with it all. I notice that if I place a static (inside,outside) 192.168.120.0 192.168.120.0 netmask 255.255.255.0 I can access 192.168.120.3 from 172.29.48.245, but t...
Yeah I have had some luck, I can get out to the external internet now, but if I try and access 192.168.120.3 from a host on another network I get:No translation group found for tcp src outside:172.29.48.245/3210 dst inside:192.168.120.3/3389I have ad...
Hi again, I have chagned DH group to 1 and lifetime of 10800, still not a lot of action. I have degug cry isa sa turned on, but there's no response on the monitor
Both configs attached. All debug cry isa sa shows is that it can't find the peer:ISAKMP: larval sa foundISAKMP (0): deleting SA: src 203.63.107.141, dst 10.43.136.10ISADB: reaper checking SA 0xd00b7c, conn_id = 0 DELETE IT!VPN Peer:ISAKMP: Peer Info...
