About jalm

jalm · 11-23-2006

Hello, i have a pix 525 with several vlans. Some are public, others are private (NAT) networks. I'm having problems with my ISP dropping the connection because some of my clients are opening too much new connections/sec. Can the PIX throttle this con...

jalm · 10-16-2006

I have a Pix 525 connected to the "internet" using the 100Mb ethernet interface named "Outside". I need to upgrade that connection to a Gigabit connection using the GigabitEthernet fiber interface.Is there a way of doing this without loosing all the ...

jalm · 07-03-2006

Hello,i'm using a pix 525 as a dhcp relay for 2 isc dhcpd servers. I enabled the "Set route" option in asdm for each vlan, but client continue to see the dhcpd servers. The pix doesn't rewrite the server filed in the dhcp reply. When the client tries...

jalm · 11-29-2006

Doesn't that config limit the connection for all the subnet? If i limit the connections to 1000, and i have 10 clients, with that config is possible to 1 client have 900conns and all the others just 100. Or am i wrong?

jalm · 11-23-2006

I had to do the changes offline and then do the upload to the pix... doing the changes online didn't work.

jalm · 10-16-2006

Thanks for your help. I was thinking in doing the changes offline and then upload the config file (tftp) and reboot the pix. The only thing that needs changing is the interface name, the ip of the new connection is the same.I will try your solution.T...

jalm · 07-04-2006

Please ignore this message, i misunderstood that option. Problem solved.Regards

Member Since	‎07-03-2006 09:35 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	7

User Statistics

User Activity

Limit the number of new connection/sec?

Connection upgrade

DHCP relay with PIX 525 and "set route"

Re: Limit the number of new connection/sec?

Re: Connection upgrade

Re: Connection upgrade

Re: DHCP relay with PIX 525 and "set route"