Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have tried to configure SNMP via Flexconfig, but not able to deploy script.
shows:
The template is not valid.
Block list CLI error: snm-server host vdc x.x.x.x community xxx version 2c, snmp-server community xxx
The FTD version is 7.4.2.
It seems ...
According to the configuration guide
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/security/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Security_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_Security_Con...
Does C9500-48Y4C-A support both SFP and SFP+ RJ45 module?
Have checked the https://tmgmatrix.cisco.com/?npid=50 Cisco Optics-to-Optics Interoperability Matrix for combability, it is on the list.
But from Cisco commerce online configuration, there is ...
Hi friends
I have deployed several FTDs in the network, but there is a problem with registering these FTDs through the internal network. Routing information and firewall ACL need to be configured. What is the IP address of the relevant CSSM registrat...
Hi
As the FTD configuration will be wiped out during migration from FDM to FMC managemanet, can I save the configuration based on FDM GUI and recover it later on FMCv platform?
Thanks
Yuan
Thanks for this information.
The solution below is configure via FMC，which is not deployed. These FTD are managed by FDM now.
I have found a link with SNMP configure via rest API on FDM 6.7, just not sure whether it is suitable for FDM 7.4.2.
Is it https based traffic? tcp 443? We need to minimize external threats from the internet.
We can register FTD to CSSM as an instance, but VBD update is interrupted. Any information regarding FQDN or IP address need to be whitelisted?
thanks
