Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Any idea's...I've read the doc about dual ISP connections (outbound): http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtmlTake from the above document "As described in this document, this setup ma...
Can anyone help me out on this:I'm used to setting up PIX's for internet usage either with Static NAT's, Dynamic NAT's or both with a router between the networks.What I want to do is segment 2 private networks with a 515E, but I can't seem to get my ...
Hi All,Been having a play with "object-groups".Have sussed out "object-groups network" and all my ACL's are working nicely!Just trying to get my head around "object-groups service".I have 10-to-20 customers each coming from a specific IP address conn...
Hi All,I'm running the following versions on my ASA5510:Cisco Adaptive Security Appliance Software Version 7.1(2) Device Manager Version 5.1(2)Couple of problems:1st; When I click the "Content Security" tab it asks me to connect to the CSC. The defau...
Great! thanks for the confirmation and pointing out my errors Will try this out at the weekendoh and before anyone mentions access-groups:access-group inbound in interface outsideaccess-group inbound_backup in interface backup;o)
understood on the routes.no router in each subnet. I want to segment the 2 networks with the firewall, but I don't want to put a router in - if that makes sense?
