Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Afaik Firewall IOS is not needed.We also tried it with a L3 switch and we didn't succeed.The L3 switch was installed as DHCP server, we applied the access-list and auth proxy on the guest VLAN interface but it didn't work out: clients could not get a...
Hi,We have managed to get the setup working as mentioned with the authentication proxy (see link in previous message).As the access is controlled with ACL's, you we were also required to config the ACS to push an updated ACL to the router/FW once the...
What we are trying to do now is that the AP authentication is open, no WEP/WPA key. User must authenticate first with a SecurID token on the router's web page, access is restricted using access lists.A router is set up as authentication proxy / firew...
Hi,We have tried to do the exact same setup as you and we also failed.When we tried to authenticate the user with PEAP-MSCHAPv2 (WinXP native) ACS gives "external DB password invalid", and does not even try (!) to send the login to the RSA server. No...
