From the following output what does the DSX1 means? Thanks!!router#sh int Serial0/1/0:15Serial0/1/0:15 is down, line protocol is down Hardware is DSX1 MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 ...
You can export the configuration of the ASA to a TFTP server using the command "write net" and then import the configuration to the PIX using the command "configure net".But I would suggest that whatever version you have running on the ASA is the sam...
Issue the command "show int Ethernet0/0" and see if the interface is up.Also to make a complete configuration go ahead and assign a name to the interface and a security level.interface Ethernet0/0 nameif myInterface security-level 99 no shutThanks!