Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I am peering with various IPV6 peers and i am receiving routes from my peers but I am not installing routes in my routing table.Below are various outputs (output values are truncated)1. shows the ipv6 bgp output table, showing a neighbor and am...
Hi,I work in a service provider environment and a customer requested for an Enterprise MPLS network for a customer.The customer is going to 2 service providers terminating on their network.the solution is something like thisCustomer CPE -CE -P/PE - P...
Hello,
Had to contact Cisco TAC, turned out to be a software bug.
"CSCuq79148 - BGP label thread is stuck in CDM init:"
This bug is fixed starting with IOS XR 5.1.3 so an IOS upgrade is required.
The workaround is to reset the BGP process which i did...
I just posted the prefix above as an example.
None of the ipv6 prefixes i am receiving are installed in the routing table, even best
RP/0/RSP0/CPU0:#sh bgp ipv6 unicast Tue Feb 2 20:32:43.057 WATBGP router identifier 44.44.44.444, local AS number 3...