Hi, I've been troubleshooting this multicast issue for a week now and getting no where! It is new configuration to get multicast traffic from one side of a firewall to the other using GRE. Devices on both sides of the firewall could be the source of...
Hi,
Some background:
We have a legacy system using multicast (dense) which works fine. The clients in VLAN 84 are connected to a Cat3850 switch. These switches in turn connect to Cat6509's which has the gateway for that VLAN. The multicast traffi...
HiWe've got 2 ACI fabrics (not linked) and are now nearing the end of the migration of services from our old Cat6500 DC switches to ACI. One ACI fabric is in our main DC, the second is in other backup DC (although a couple of live servers do run ther...
Hi,
I've been thinking this through for a few days and would like to gauge public opinion on how others would approach it.
Background:
We have 2x Cat6500's for the network core. Into these connected the data center switches (more 6509's) and the ac...
Hi,
(This was originally posted in Cisco Communities, now removed and only here - I'm not sure how I ended up in there to post it, nor what the difference between the two sites is - except that there appears to be few users over there!)
I've been...
Hi,
Does this help? Something I wrote up last time I went through it:
https://aciandme.wordpress.com/2016/03/01/recommended-sequence-for-apic-build-and-fabric-discovery/
Andrew
Hi Leon,
When you say "Configure the SVI in ACI BD", is that adding a Subnet in L3 Configurations?
If so, how can this be used to form the OSPF adjacency to the ASA? I can't see how to link it to L3out in the Logical Interface Profile (although I m...
Hi Joseph,
Thanks for this. A follow-up question if I may (and sorry if this sounds simplistic.....)
As the network is a /28, the SVI on current 6500's is acting as the gateway. If we move the SVI to the L3out in ACI, would it still function as a ...
Claudia,
You say "Probably not that helpful" - are you kidding?! This is great, thank you! Certainly a lot to chew on!
Thank you for taking the time to think about and write this
Andrew