Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a problem with port flapping on connections from my SMC server to my Cisco switch.Server board is a Supermicro X11SDW-4C-TP13F+ which has 4x onboard x722 10g SFP+ LAN ports.Switch is a SX350X-24F, and I am using SFPP-PC03 DAC copper twinax pas...
I tried connecting to the combo port in my sx350x-24f. This works without any port flapping.Still my main problem is that the 4 combo ports in my sx350x-24f are being used to connect 4 clients through 10gbase-t rj45 cables. (one of the reasons I chos...
As a follow up to the problem I reported with port flapping between the SFP+ ports of X11SDW-4C-TP13F+ SFP+ and Cisco SX-350X-24F I have done some testing. First off, In order to eliminate the possibility that the problem with port flapping is not ca...
HiThe cable was connected to port 20 (which was down), I unplugged it and plugged it into port 19.First with flow control enabled on both the port and the LAN and EEE disabled on the port. .Second time with flow control disabled on both the port and ...
