Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Given the current "situation" in the world, most of us are now working from home. I needed a more reliable WiFi implementation in my house to support the 5 of use (wireless laptops, cells phones, IOT devices, video streaming etc). Frankly I got tire...
Here is a partial output of the "show sysinfo" command show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................
Rasika I have followed your suggestions. 1) Reverted back to AP set to "local mode"2) Entered the following settings:Wireless -> 802.11a/n/ac -> RRM -> TPC
Power Level Assignment Method = Automatic
Maximum Power Level Assignment (-10 to 30 dBm) = 17...
Rasika I had another idea.......The 2.4Ghz is used primarely by 1-2 ip cams and about a dozen or so IOT devices which use microcontrollers only supporting 802.11 b/g/n. What if I were to dedicate one of the 8 APs (say the one on the second floor, mid...
Rasika thank you for the quick reply. Here is the information you requested: (Cisco Controller) >show advanced 802.11a summary
Member RRM Information
AP Name MAC Address Slot Admin Oper Channel TxPower
-...
