Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a single net static for 120 dmz servers with no max_conns or em_limit set.Can anyone confirm whether values I set on the net static will apply to each host, or to the combined traffic for all hosts? I plan to replace with separate statics for ...
Believing I had a sync problem with the DCR, I zeroed the DFM database as detailed in another post here, ieperl dbRestoreOrig.pl dsn=dfmInv dmprefix=INVperl dbRestoreOrig.pl dsn=dfmFh dmprefix=FHperl dbRestoreOrig.pl dsn=dfmEpm dmprefix=EPMdelete /ob...
TCP/80 keepalive works fine. With default HTTP keepalive the server showed down, so Ethereal traced and discovered response was 302 not 200. Set response code to 302, but still showed down. Any ideas?service Doyle protocol tcp ip address 10.0.126.1...
2x 6513/MSFC with FWSM in each, controlling staff/student access to internal servers. 6513s are trunked together, so vlans 10 and 20 appear on each. OSPF on all devices.workstation on vlan10 routes to 6513-A (via hsrp-address)then via vlan 20 to FW...
this was a simple config to provide a "sorry" link when the server was down - content elibrary protocol tcp port 80 url "/*" add service corey vip address X.X .132.180 activeservice corey protocol tcp port 80 ip address X.X .126.180 ...
Yes....FWSM-Server-Firewall(config-if)# ospf cost 100.... but the new cost then applies to both 6513s - there's no option to specify different costs for different neighbors.
