supershunge
Level 1
Level 1
Member since ‎02-26-2017
‎12-11-2020

User Statistics

  • 22 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 28 Helpful votes Received
Recent Badges
First Discussion
5 Discussion Posts
5 Helpful Vote
30 Helpful Vote
25 Helpful Vote
20 Helpful Vote
20 Discussion Posts
15 Helpful Vote
10 Discussion Posts
1 Reply

User Activity

ip access list a 10 permit tcp any 192.168.11.3/32 15 permit tcp any 192.168.2.11/32 18 permit tcp any 192.168.2.2/32 20 deny tcp any 192.168.0.0/20 eq 3389 30 permit ip any any int g1/0/1 ip access-group a out配置完成后,只有remark 10 能正常访问,15 、18...
permit ip host 10.1.11.3 10.1.0.0 255.255.240.0 capture Enable packet capture on this filter for session dscp Match packets with given dscp value fragments Check non-initial fragments log Log matches against thi...
1、思科交换机能正常工作光功率能支持最大的衰减多少db?2、行业标准、国家标准是多少db范围内是正常?3、4500系列查看光路衰减的命令是多少,show int g3/2 transceiver
本帖最后由 supershunge 于 2018-2-1 19:42 编辑 各位大佬,关于交换机的STP的一些问题困扰了我很久,忘各位大佬能给予帮助交换机在选择根桥的时候,是由它的桥ID来决定的,而桥ID又是由优先级加交换机的MAC地址来决定,在这里我有一个疑惑,这里的交换机MAC地址具体指的是哪个MAC地址,是交换机上某个端口的MAC地址还是背板mac,如何查询这个mac具体在哪台设备
Community Statistics
Member Since ‎02-26-2017 09:41 PM
Date Last Visited ‎12-11-2020 03:52 AM
Posts 22
Total Helpful Votes Received 28
Helpful Votes From