Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a cisco 3750 switch. It's IP address before I reset it was 192.168.1.18, and I was able to telnet into it. I reset it by holding the Reset button in the back down for 20 seconds. The fans went to high speed. I scan my network for the devic...
I am trying to clear a mac from a port. Here is what it looks like from the running config:interface GigabitEthernet5/0/7switchport mode accessswitchport port-security mac-address stickyswitchport port-securitysh interfaces status err-disabled retur...
I saw the mac on port 6, and ran these commands:no switchport port-security maximumno switchport port-security mac-address stickyno switchport port-securityand now it looks like my port can finally connect! So I can't have more than one port with t...
The port still gets shut down. Secure Mac Address Table-----------------------------------------------------------------------------Vlan Mac Address Type Ports Remaining Age(mins)---- ----------- ---- ----- -------------1 78 SecureSticky Gi5/0/3 -1 0...
