Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,
I have a question and I am hoping you can answer it for me.
I have a situation where I am going to have a isr 1941 connected to an ASA 5508.
The public IP for the outside interface of the router and the ASA need to be on the same /29. T...
Hello all,
I have a question and I am hoping you can answer it for me.
I have a situation where I am going to have a isr 1941 connected to an ASA 5508.
The public IP for the outside interface of the router and the ASA need to be on the same /29. T...
Ok all. I have a issue. I have a flat network that will consist of 2 cable DSL connections. One using DHCP and the other using a static route. These will connect to a ASA 5506x (I have not configured one of these before). The ASA will connect to a 36...
Yes it is the opposite. The current environment does not have a router. It is just the firewall. We will be putting a Router at the Border to do DMVPN. We currently have a meshed topology through Site to site VPNs on the ASA. While doing this transit...
This is why I need the help. For the time being the outside interface of the ASA has to keep the public ip for VPN purposes. We are transitioning to Azure and are trying to cutover but the meshed network that is using the ASA as its VPN needs to stay...
Topology is as follows
Internet 184.90.180.129/29
-
-
-
Router (outside int) 180.90.180.134/29
(inside int) this is where i need help
-
-
-
-
ASA (Outside int) 180.90.180.130/29
(inside int) 10....
