Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is there any way to load IOS from rommon ("switch:" prompt) if the bin file is missing or currupt other than xmodem? Can you boot from another stack member, or set up a tftp load like you can with a router by setting environment IP and TFTP variable...
Unfortunately, I have found the answer. The CSM is NOT SUPPORTED in 12.2(33).http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/csm/4.3.x/release/notes/OL-13871.html#wp38794So it appears as though we are stuck at the 12.2(18) level ...
We run CSM ver 4.2(3a) on our production 6500's using sup720's on IOS ver 12.2(18)SXD7 with no problem. I started testing using this combination which works properly. Upgrading to 12.2(33)SXI (the latest) causes the CSM to power down, and upgrading...
I see this thread is half a year old, but I am experiencing the same issue and have more information to add.I am working on replacing some Sup-II's with Sup720's and some of the chassis also have CSM's in them. I have set up this configuration in ou...
Thanks. I was aware of the documented method, but thought I'd try my luck at finding someone that had found something else. Undocumented features can occasionally do wonderfull things but are not officially supported.Thanks for your assistance.
